7a & 7b) while system is running. "@context": "https://schema.org/", Install the other corrugated 
Reply, I have a cracked multi-port valve (808-0043-PB.0211) and I was hoping this is a compatible replacement. Reply, Hi Mark, we do not have an ETA on this valve. Is the any way to fix this ?
Change). Reply, Hi, Ed. Align drain with drain clearance on base. "caption": "In The Swim Blog" Reply, I have a wvs003 multiple valve. Swimming Pool Cartridge Filter. Apply Teflon tape (4 wraps ideal) to Pressure Gauge (#3). 10. normal operating position. "name": "In The Swim",
Phoenix AZ
Backwashing - Backwashing a sand filter is very easy. For online orders over $40 (before tax), shipping and handling is FREE. Change), You are commenting using your Twitter account. Reply, Michelle, most of the time when we see sand going back into the pool this is due to a broken lateral. This link shows three pictures. document.getElementById( "ak_js_1" ).setAttribute( "value", ( new Date() ).getTime() ); This site uses Akismet to reduce spam. You can also replace the Valve Lid Assembly (600-9600)or the entire valve, WVS002 (prior 2001) or WVS003(after 2001). Or, replacing the entire multiport valve may be in order, if the key assembly parts are old and worn. Squeeze Super-Glue into the crack, from top to bottom, and quickly unthread the gauge, so the crack will close up. Bulkhead parts are considered Filter parts, not Valve parts. 
the filter needs to be cleaned. Why else would it just bypass?
"mainEntityOfPage": "https://blog.intheswim.com/leaky-pool-filter-multiport-valves/", I have since replaced thr sand twice, checked for channeling and replaced spider gasket. If the valve body is cracked just below where the pipe screws into the valve, you can replace the valve body, or you can try to repair the crack with Super Glue, as described two paragraphs above. "@type": "Organization",
The gasket is not sold separately for this valve, you have to replace theValve Diverterw/ Gasket (600-9500).
Yes, this valve is the correct replacement. 4. All cloudy and all chemicals are balanced. At this point it is time to backwash. Reply, Hi Troy, You're not using the correct gasket. Over time, they may wear out or dry out or blow out, or lose their lubrication. My Laser 225L Sand Filter is leaking from under where the flange connects to the filter, how can I check the o-ring under the flange to fix this? 
Turn pump on. Sand filters work by spraying water over the surface of the sand, then as the water seeps through the sand, the dirt is trapped in the sand. (67%)
Secure sand filter body to base Reply, Paul, This valve should fit if your filter was manufactured after 2001. "name": "Mark Garcia", NOTE: Soften hose ends with warm water to ease installation onto fittings (if Copyright 2022 INYOpools All rights reserved, Top MPV, Split Nut Style, 2001-Current - WVS003, instructions for how to enable JavaScript in your web browser, Waterway Valve Diverterand Spider Gasket, Video on How to Replace a Pool Filter lateral, Waterway Top Mount Valve Clearwater/Valve Lid Assembly, Waterway Top Mount Valve Clearwater Parts, Complete part listing for Waterway Top Mount Valve Clearwater, Complete part listing for Waterway Clearwater Sand Filter Top Mount, Complete part listing for Waterway Carefree Sand Filter, How to Replace a Spider Gasket on a Multiport Valve, This valve mounts to the filter using a split nut, For valves that use a stainless steel clamp to mount to the filter use valve part number WVS002 instead. Is this the correct part? Is this the right multiport valve for a 400# eco-kleer sand filter? DO NOT over tighten. If you cant get the leak to stop, you can pull off the valve to inspect the flanges and flange o-ring. In doing so, the sand stays in perfect condition and is able to filter the water with superiority. Turn pump on for 30 seconds. Tighten the key assembly in place over the new gasket (no lubrication needed), and youre done replacing a spider gasket. 
Side mounted multiports, used on sand and DE pool filters, connect to the filter via two (2) Bulkhead Unions, and two sweep arms. 2. from SAINT MATTHEWS, SC
Reply, how long til part is shipped and from where? Then you can pull off the cover, replace the spring, and while youre in there, replace the stem o-rings too. This splits the plastic valve body and causes a leak, but there is a simple repair. Tighten down clamp bands until they squeak and creak, often times this will fix a leak between the filter flange and filter valve. Overpowered pump? Ever since it seems the filter is bypassing the sand and just dumping dirt right back into pool. If normal, check that the cover screws are all tight.If its still leaking, remove all cover screws and pull out the key assembly. On the new fitting, smear RTV silicone sealer on the threads and then wrap it 3x with Teflon tape. Reply, Hi August, Yes the threaded ring is included. 
NOTE: Make sure tank flange is clear of any sand debris. Reply, i have a an outdoor pro 22 in filter with a valve part number 808-0043-re.1116, mnufactured in 2016 and it lists waterway plastics on the label. 9. Reply, i have a eco Kleer 22 sand filter. disassemble filter or pump assemblies.
"author": { It could cause severe injury or harm to user. The dirt builds up mostly in the top 3-4 inches of the sand, and as that happens, the water flow is restricted. Is it still possible to get replacement V700 multiport valves ? "url": "https://x1.adis.ws/v1/media/graphics/i/lesl/its-logo-wide", our exclusive 7-Position Multi-Port Valve, which ensures safe and simple filter IMPORTANT: Clean and remove all debris from filter tank This is the correct replacement valve for your model filter. Pressurized vessel. After the filter has backwashed for 3-4 minutes, unplug the pump again, move the valve handle to the rinse position and plug the pump back in. I would open it up (the valve) and inspect the spider gasket. Sometimes small bits of debris get stuck between the rotor and spider gasket, and this flushes out the valve. After installing it, it continues to leak to the point it drain my pool.
Simply click the reply link below to provide the requested information so we may make the appropriate suggestion. Reply, Hi Steve, Yes, replacing the valve will resolve the problem and the WVS003 is the correct valve for the FS022 filter. inlet port of multi-port valve (#4) by positioning gasket (#11) and hand tighten "@type": "ImageObject", 
Waterway filters come in different sizes and offer different horsepower capacities to suit your personal pool.
To repair, you can just buy the new key assembly, already assembled, or you can break down the valve and replace the spring. Unlike my many cautions above to not overtighten PVCfittings into the multiport valve body, when tightening clamp bands, there is no such thing as too tight. Install filter tank split-nut assembly (#7, 7a & 7b) by threading split-nut clockwise it appears this is a waterway valve unit so will this assembly work? The pump however is still pumping at full capacity. The ClearWater Deluxe Sand Filter System features Top mounted multiports attach differently than sidemount multiport valves, so lets take them each separately. Reply.
I had water leaking out my waste line so I just replaced the entire Hayward SP0714T VariFlo Top-Mount Multiport Valve and got the same result. Reply, Afternoon, does the split nut appear to be cracked or damaged in any way? Murray, there is surely an o-ring or gasket in-between the valve body flange and the tank flange. To do this remove the key assembly from the valve, and knock out the pin to remove the handle. Will this unit work with my sand filter? It has numbers on it but I'm not sure what u need, Hi Dj, The spider gasket is only sold glued into the diverter. Often, just reseating the stem o-rings will seal up a leaky mulitport lid cover. Reply, When the pump is running water seeps out from the split ring when on low and when on high will drain the pool. Be sure to use the correct gasket (or use a Valve Go-Kit) for your valve, as they are all different sizes.
Reply, Hi. Reply, Label on my filter valve is faded. from Westfield, MA
"logo": { Hi,Gbl. from Columbia, TN
NEVER CHANGE VALVE POSITION WITH PUMP RUNNING! 
Reply, What is your filter model so I can identify the correct replacement for you? "width": "611", Inspect the spider gasket (wagon wheel shape) for wear or damage (note that some Pentair valves have the spider gasket on the bottom of the rotor). Reply, Most likely you have a bad spider gasket and you will need this WVS003 Diverter w/ Spider Gasket
Mine is a Proline Sand Filter with 808-0043-N marked on the top. 0, (5
Reply, Not the gasket that goes in between the valve body and the filter bodybut is there a gasket between the standpipe and the cage assembly at the bottom of the valve assembly?
Use lots of pool lube on the oring and flanges to improve the seal and tighten it all up again. Rotate multi-port valve handle to Backwash position. Reply, Gbl, There is NOT an o-ring / gasket located there. 
A:Slow seeping weeper running down the filter tank? Reply, Jim, If you look hard at the label on the "Waterway Top Mount Valve Clearwater/Valve Lid Assembly" you can just make ot the 7 positions and their sequence. Be careful not to overtighten the gauge, just 3 or 4 turns, or until it feels snug. So then, todays post is about leaky multiport valve problems and solutions. 
Top mounted valves used on sand filters, attach to a flange that is molded onto the top of the filter tank.
Pull back on the valve and/or push on the tank to pull them apart, and be prepared to support the valve after pulling it off (cinder block or bucket), to avoid a lot of weight on connected pipes. Hi Shu, filter valves are either clamped or bolted to the tank flange. Reply.
I have a 10 year old S244T Hayward filter.
INSTALLATION
inground pool. But if the leak is between the valve and the flange, the first thing to check is the tightness of the bolts or the clamp band (turn the pump off first). Eventually the sand becomes so encrusted with dirt, water can barely flow through. For your Waterway Eco KleerSand filter, you will require this Waterway Valve Diverterand Spider Gasket
5. 6 specific types of multiport valve leaks. IMPORTANT: To prevent damage to internal filter lateral components, fill filter out of 5 stars)
There is no need to 4. Bad filter sand, mislabeled and not graded correctly 4. 
of
CoonSkinHockey
Thanks
tank flange. (150lbs). Reply, yes, this is the correct Waterway Valve
Just wanting to know what all I need to get it back ship shape. If you have leaking on your valve then I would suggest this Waterway Upper Handle Assembly99% of the time this part will fix your issue and it is in stock ready to ship. Events such as closing a return valve while the pump is running, or starting up the system with plugs in the wall returns, builds up a lot of pressure and could even blow the pipes right out of the valve. Probably not something to be too worried about. Learn how your comment data is processed. }, 3. Shut off the pump and tighten the gauge more to open up the crack slightly. "height": "219", necessary). }, To disconnect a side mount valve from the filter, open the air bleeder and drain most of the water from the filter tank, then loosen the bulkhead union nuts. At the point where the Pump and Return pipes are threaded into the valve is a common spot for a leak. Use a sponge or leaf blower to remove the water sitting under the handle, and turn the pump back on and see if it still leaks. wrench 1/2 to 3/4 of a turn to secure multi-port valve to filter body (Detail 2). Is this really the correct replacement for a 1-1/2" multi-port 7 function sand filter valve? 1. until hand tight. Reply, Keith, The WVS003 has a total of 3 ports. It may be damaged or out of the groove. onto already installed buttress (#10). See attached pics.
1008 clamp style multi- port valve that is bad I think we got it in 2009 its a sand filter can yo please tell me which one would replace that valve. Hi thats a brand/model we are not familiar with here in the US- but I did a quick google search for V700 multiport valves and found several listings for .au websites, so yes seems to be still available. It has water coming out of the backwash when it is on filter. All orders received before noon will ship that SAME DAY. Install waste adapter fitting (#1) with o-ring (#2) (Detail 4). }, Hello and thank you. filter tank opening, add only recommended #20 grade silica sand (see Fill Chart). Inspect and lubricate the o-rings on the valve sweep elbows. If that didnt work, then you may have to consider a valve rebuild. If you have unions, or install unions instead of couplings, you can quickly disconnect the Pump and Return pipes (for valve repairs, sand changes, or other repairs). need replacement top. Thanks, Hi,Guthrie. My number is 808 0043 wat 1208.
Move it slightly left and right and then back to the Filter position. (6/20/2011), product was exactly what we needed. It's a good valve, and had the folks who installed my pool not over tightened the original one cracking the top, I would still be using the original. Please email us at sales@waterwayparts.com and we can send you the file.
Reply, Hi, Judee. If it begins to saturate the ground under the equipment you may want to take action. Click this link here to order - WVS003 Replacement Valve
Robert
Valve is now in Thanks. The air slowly leaks into the filter, and the water runs out thru the pump, and back to the pool. Is the filter pressure higher this year than before? 
"caption": "In The Swim Blog" 
hand tighten (Detail 4a). (5/18/2011). Replace the key into the valve and tighten up the cover screws, then fire-up the pump to check for leaks. Above ground pools are easy to maintain if you have the hardware to go with them. The water is then collected by the under drain and pumped back into the pool. The first thing to check is that the system is not under unusually high pressure, from a dirty filter, closed return valves or plugged wall returns. Thread into multi-port
"dateModified": "1/22/2020", The waste port pictured in the image you are looking at it on the opposite side of the other 2 ports. tank full with water prior to adding sand. (LogOut/ Waterway, Alternate Part #'sWVS003, 26-270-1520, WWWVS003, Fits currentWaterway Carefree SandFilters, How long do you think it will be out of stock
Reply, I have a waterway 808 0043.
A: Another common leak is a small trickle of water running down below the pressure gauge on top mount sand filters.
(4/16/2016). Reply, on valve positioner not snapping down so water is coming out of backwash port. Rotate multi-port valve handle to Rinse position. Turn off pump. "datePublished": "1/22/2020", We bought a house with the pool and pump no directions came with it. 
This valve WVS003 is the correct replacement. Reply, due you have part # 808-0043n ? 
Any help
13. The much cheaper way is to remove the key assembly from the valve, and knock out the pin to remove the handle. You want to make sure the gauge is firmly held in place, if the gauge were to shoot out under pressure, you could lose a lot of water before discovering the leak.
Position and hand tighten smaller end of sand filter hose assembly (#15) to top Shipping Details & Conditions. I get very frustrated w this thing the gasket is 17 bucks each?? can I lube positioner somehow to work smoothly? Reply, This part appears to be out of stock everywhere. 
This valve will work with model manufacturer after 2001. Remove the key assembly and look under the lid at the spring to check for rust that has broken the springs coil. Ft. "primaryImageOfPage": { valve. Multiports also offer Waste and Recirculate functions, which can be useful at times. The pool was bought around 2010. A: There is always some rain water that collects around the handle, but if water starts to ooze up and overflow onto the lid, you have a common multiport valve leak. the handle on diverter broke. No matter what position it's in, water comes out of the backwash drain. If you find that the spider gasket looks good but is just loose, break out the Super Glue or silicone, and use dabs to glue any loose rubber down into the (dry) grooves of the valve body. thank you
Reply, I'm trying to find a multiport valve for my proline filter the number on mine is 808-0043N.
This reverses the normal water flow in the system, stirring the sand up and blowing the dirty water out the backwash port. Most pool supplies ship via Fed Ex and delivery times within the Continental U.S range from 2-5 days.
First determine if the leak is coming from between the tank and the flange, or the valve and the flange. This product was just like the one that was on my filter to begin with. 2
Chemical corrosion can break down the stainless steel spring over time. Need a landed estimate time of arrival. For leaks on sidemount multiport valves, determine if the leak is between the tank and the bulkhead or the bulkhead and the filter. 8. 
Reply, my handle for the valve 808-0043-n broke/will handle for valve wvsoo3 work? 
Rotate multi-port valve handle to Filter position. Cold water temperatures will make it worse, as the o-ring can shrink just slightly, or small bits of grit and debris can get wedged up around the stem o-rings, causing leaks. Over the last couple of seasons the handle of the valve sounds as if a plastic gear is stripping and skipping. Bulkheads also have gaskets and spacers on both sides of the tank wall, that may need service or replacement at some point which may be after youve tightened the bulkhead, but it still continues to ooze water. Change), You are commenting using your Facebook account. Reply, I have a proline high rate sand filter model # FS022, and the valve assembly is leaking out the backwash port.. bought it in 2007 and manual shows multiport valve assembly part # wvs003nwill this fix problem and is your wvs003 the right part? Reply, My mutliport valve is cracked in several places on the top port. For this situation, I would first just reposition the valve. i have two ports that cracked and need to replace the assembly. Reply, Hi Erich, We actually do now have this valve in stock, so I would suggest ordering it now through the website as our inventory has been selling fast. "@type": "BlogPosting", DE multiports and Sand multiports are not interchangeable, because they operate in reverse. Be sure that during reassembly, you orient the cover and rotor to each other in the same direction as before. If it still leaks after repositioning the rotor onto the spider gasket, shut off the pump again and remove all of the cover screws, and pull out the key assembly. 
Ive plugged the waste line before, in a pinch but it should be avoided; these problems above can cause water to bypass the filter, resulting in poor filtration, and one time in the future someone is going to forget to open the backwash line before backwashing, which can cause even bigger problems. Repeat steps 3 & 4 until all discharge water is clear while pump is turned on. nanniesrock
Do you know if you will be getting more? The part that mates with the stand pipe? 
Reply, The WVS002 is the valve prior to 2001 and the WVS003 is the valve after 2001. "image": { 90 second intervals or until discharge water is clear. Pressure was around 14# at install runs at 20 now. If the flange is leaking where it connects to the tank, Im afraid I dont have much help for you. Reply, After back washing the pool and returning to filter position , water pours out of the backwash hose opening on the filter. "contentUrl": "https://x1.adis.ws/v1/media/graphics/i/lesl/its-logo-wide", 7. (LogOut/ When this happens, your valve handle is floppy and theres no tension when you push down. Reply, I need to replace the valve on my 19" Proline sand filter and the only number that I could find is 718-1960. Fill in your details below or click an icon to log in: You are commenting using your WordPress.com account. "@type": "ImageObject", 
Reply, I have a Proline 808-0042-N.1008 7 Position multiport Valve (sand Filter) with a 22 inch. 
"keywords": "", If you see a water leak around the filter when the filter is running, that is likely an air leak when the filter is off. Another cause of a backwash line leaking is that the spring inside of the key assembly has failed. What should i do? Problems with valve, like broken spring under lid, or gasket installed upside down (flat side goes down), or gasket not glued in place. To do this you may need to cut the pipes with a hacksaw, and glue couplings to reconnect the pipes afterwards. Still no good. The Eco Kleer is preferred by many swimming pool owners because they come in varying sizes with different filtration methods. I have a Pentair SD40 I recently replaced the sand. Push multi-port valve evenly onto You can replace the PVC fittings and some pipe, which you can find at any home or hardware store, along with pvc primer and glue. Reply, Lubingparts will not likely resolve the issue. I have heard of filter valves leaking when some poorly graded filter sand was used. These two o-rings, about the size of a quarter, fit onto the stem (which is connected to the rotor, aka footpad or diffuser or diverter), or they fit under the cover. I am including pics bc I dont know what model # it is. Hand tighten, then turn with large pliers for another full revolution, being careful not to overtighten. If youre guilty of this, peel off the previous years layers and lay on 1-2 new layers of Teflon tape (always wrapping the threads in a clockwise direction).
Remove 4 hose clamps (#14) and position over end of corrugated hoses (#13). You can view that as key number 9 on the parts diagram when you click here. Turn pump on and run for "headline": "Leaky Pool Filter Multiport Valves",
If you definitely determine that the threads are stripped inside of the valve, you can thread in a Heli-Coil or other 1/4in-20 thread repair insert, which involves tapping out the hole slightly larger, and screwing in a double threaded helix type of bushing, which gives you new 1/4in threads for the gauge. 
using bolt (#20) and washer (#21) as shown. Or the filter sand maybe? The valve threads cant be tapped or rethreaded, because then the gauge threads will be too small. If it still leaks, or weeps, check to see if return side pressure can be reduced, by changing filter sand, and/or reducing resistance after the filter with less equipment, straighter runs or larger diameter pipe. We have the complete line of all ECO-Kleer pump and filter parts in stock. Install multi-port valve with inlet and outlet ports facing pool. Seems like the quick and thorough fix would be to replace the entire waterway. Valve plumbed backwards on the in/out ports 2.
This is commonlydue to the springfailing in the valve. 2. 5. My Poolrite V700 multiport valve seems to be leaking above the flange, where the valve body is moulded onto the black flange that is screwed onto the filter. Run the filter on rinse for 1minute. Your options are to replace the MPV Handle - 602-1931, Valve Lid Assembly - 600-9600or theNew Style Valve -WVS003. 
A third cause of the pressure gauge leaking problem is when the valve body is cracked just below where the gauge screws in. { Install corrugated hose (#13) onto return sweep assembly (#12), on multi-port
Hi David, did you just replace the pump? If there is no damage to the gasket or to the spring under the lid of the valve, then you would suspect an obstruction or restriction (dirty filter, bad sand, plugged returns, closed valves, clogged line, backwards plumbed MPV), or as you mention, an overpowered pump. Reply, 1
Orders that are under $40 will have a $5.99 shipping fee added. Not uncommon, and not really a problem. Reply, Does it come with the threaded ring
Clean it out with a toothbrush or small wire brush, and be sure its dry. Reply, Is there anyway you can just purchase they handle on the valve, the plastic handle for direction of the valve broke .valve is okay . Reply, Sand keeps flowing in after I rinxe and then go to filter---am I missing something? it has part # 808-0043-n
If you are not sure what filter model that you have then please emailus images of the filter and valve to upload@inyopools.comso we can confirm for you.
Reply, I have a cracked multi-port valve (808-0043-PB.0211) and I was hoping this is a compatible replacement. Reply, Hi Mark, we do not have an ETA on this valve. Is the any way to fix this ?
Change). Reply, Hi, Ed. Align drain with drain clearance on base. "caption": "In The Swim Blog" Reply, I have a wvs003 multiple valve. Swimming Pool Cartridge Filter. Apply Teflon tape (4 wraps ideal) to Pressure Gauge (#3). 10. normal operating position. "name": "In The Swim",
Phoenix AZ
Backwashing - Backwashing a sand filter is very easy. For online orders over $40 (before tax), shipping and handling is FREE. Change), You are commenting using your Twitter account. Reply, Michelle, most of the time when we see sand going back into the pool this is due to a broken lateral. This link shows three pictures. document.getElementById( "ak_js_1" ).setAttribute( "value", ( new Date() ).getTime() ); This site uses Akismet to reduce spam. You can also replace the Valve Lid Assembly (600-9600)or the entire valve, WVS002 (prior 2001) or WVS003(after 2001). Or, replacing the entire multiport valve may be in order, if the key assembly parts are old and worn. Squeeze Super-Glue into the crack, from top to bottom, and quickly unthread the gauge, so the crack will close up. Bulkhead parts are considered Filter parts, not Valve parts. the filter needs to be cleaned. Why else would it just bypass?
"mainEntityOfPage": "https://blog.intheswim.com/leaky-pool-filter-multiport-valves/", I have since replaced thr sand twice, checked for channeling and replaced spider gasket. If the valve body is cracked just below where the pipe screws into the valve, you can replace the valve body, or you can try to repair the crack with Super Glue, as described two paragraphs above. "@type": "Organization",
The gasket is not sold separately for this valve, you have to replace theValve Diverterw/ Gasket (600-9500).
Yes, this valve is the correct replacement. 4. All cloudy and all chemicals are balanced. At this point it is time to backwash. Reply, Hi Troy, You're not using the correct gasket. Over time, they may wear out or dry out or blow out, or lose their lubrication. My Laser 225L Sand Filter is leaking from under where the flange connects to the filter, how can I check the o-ring under the flange to fix this? Side mounted multiports, used on sand and DE pool filters, connect to the filter via two (2) Bulkhead Unions, and two sweep arms. 2. from SAINT MATTHEWS, SC
Reply, how long til part is shipped and from where? Then you can pull off the cover, replace the spring, and while youre in there, replace the stem o-rings too. This splits the plastic valve body and causes a leak, but there is a simple repair. Tighten down clamp bands until they squeak and creak, often times this will fix a leak between the filter flange and filter valve. Overpowered pump? Ever since it seems the filter is bypassing the sand and just dumping dirt right back into pool. If normal, check that the cover screws are all tight.If its still leaking, remove all cover screws and pull out the key assembly. On the new fitting, smear RTV silicone sealer on the threads and then wrap it 3x with Teflon tape. Reply, Hi August, Yes the threaded ring is included. NOTE: Make sure tank flange is clear of any sand debris. Reply, i have a an outdoor pro 22 in filter with a valve part number 808-0043-re.1116, mnufactured in 2016 and it lists waterway plastics on the label. 9. Reply, i have a eco Kleer 22 sand filter. disassemble filter or pump assemblies.
"author": { It could cause severe injury or harm to user. The dirt builds up mostly in the top 3-4 inches of the sand, and as that happens, the water flow is restricted. Is it still possible to get replacement V700 multiport valves ? "url": "https://x1.adis.ws/v1/media/graphics/i/lesl/its-logo-wide", our exclusive 7-Position Multi-Port Valve, which ensures safe and simple filter IMPORTANT: Clean and remove all debris from filter tank This is the correct replacement valve for your model filter. Pressurized vessel. After the filter has backwashed for 3-4 minutes, unplug the pump again, move the valve handle to the rinse position and plug the pump back in. I would open it up (the valve) and inspect the spider gasket. Sometimes small bits of debris get stuck between the rotor and spider gasket, and this flushes out the valve. After installing it, it continues to leak to the point it drain my pool.
Simply click the reply link below to provide the requested information so we may make the appropriate suggestion. Reply, Hi Steve, Yes, replacing the valve will resolve the problem and the WVS003 is the correct valve for the FS022 filter. inlet port of multi-port valve (#4) by positioning gasket (#11) and hand tighten "@type": "ImageObject",
Waterway filters come in different sizes and offer different horsepower capacities to suit your personal pool.
To repair, you can just buy the new key assembly, already assembled, or you can break down the valve and replace the spring. Unlike my many cautions above to not overtighten PVCfittings into the multiport valve body, when tightening clamp bands, there is no such thing as too tight. Install filter tank split-nut assembly (#7, 7a & 7b) by threading split-nut clockwise it appears this is a waterway valve unit so will this assembly work? The pump however is still pumping at full capacity. The ClearWater Deluxe Sand Filter System features Top mounted multiports attach differently than sidemount multiport valves, so lets take them each separately. Reply.
I had water leaking out my waste line so I just replaced the entire Hayward SP0714T VariFlo Top-Mount Multiport Valve and got the same result. Reply, Afternoon, does the split nut appear to be cracked or damaged in any way? Murray, there is surely an o-ring or gasket in-between the valve body flange and the tank flange. To do this remove the key assembly from the valve, and knock out the pin to remove the handle. Will this unit work with my sand filter? It has numbers on it but I'm not sure what u need, Hi Dj, The spider gasket is only sold glued into the diverter. Often, just reseating the stem o-rings will seal up a leaky mulitport lid cover. Reply, When the pump is running water seeps out from the split ring when on low and when on high will drain the pool. Be sure to use the correct gasket (or use a Valve Go-Kit) for your valve, as they are all different sizes.
Reply, Hi. Reply, Label on my filter valve is faded. from Westfield, MA
"logo": { Hi,Gbl. from Columbia, TN
NEVER CHANGE VALVE POSITION WITH PUMP RUNNING! Reply, What is your filter model so I can identify the correct replacement for you? "width": "611", Inspect the spider gasket (wagon wheel shape) for wear or damage (note that some Pentair valves have the spider gasket on the bottom of the rotor). Reply, Most likely you have a bad spider gasket and you will need this WVS003 Diverter w/ Spider Gasket
Mine is a Proline Sand Filter with 808-0043-N marked on the top. 0, (5
Reply, Not the gasket that goes in between the valve body and the filter bodybut is there a gasket between the standpipe and the cage assembly at the bottom of the valve assembly?
Use lots of pool lube on the oring and flanges to improve the seal and tighten it all up again. Rotate multi-port valve handle to Backwash position. Reply, Gbl, There is NOT an o-ring / gasket located there.
A:Slow seeping weeper running down the filter tank? Reply, Jim, If you look hard at the label on the "Waterway Top Mount Valve Clearwater/Valve Lid Assembly" you can just make ot the 7 positions and their sequence. Be careful not to overtighten the gauge, just 3 or 4 turns, or until it feels snug. So then, todays post is about leaky multiport valve problems and solutions. Top mounted valves used on sand filters, attach to a flange that is molded onto the top of the filter tank.
Pull back on the valve and/or push on the tank to pull them apart, and be prepared to support the valve after pulling it off (cinder block or bucket), to avoid a lot of weight on connected pipes. Hi Shu, filter valves are either clamped or bolted to the tank flange. Reply.
I have a 10 year old S244T Hayward filter.
INSTALLATION
inground pool. But if the leak is between the valve and the flange, the first thing to check is the tightness of the bolts or the clamp band (turn the pump off first). Eventually the sand becomes so encrusted with dirt, water can barely flow through. For your Waterway Eco KleerSand filter, you will require this Waterway Valve Diverterand Spider Gasket
5. 6 specific types of multiport valve leaks. IMPORTANT: To prevent damage to internal filter lateral components, fill filter out of 5 stars)
There is no need to 4. Bad filter sand, mislabeled and not graded correctly 4. of
CoonSkinHockey
Thanks
tank flange. (150lbs). Reply, yes, this is the correct Waterway Valve
Just wanting to know what all I need to get it back ship shape. If you have leaking on your valve then I would suggest this Waterway Upper Handle Assembly99% of the time this part will fix your issue and it is in stock ready to ship. Events such as closing a return valve while the pump is running, or starting up the system with plugs in the wall returns, builds up a lot of pressure and could even blow the pipes right out of the valve. Probably not something to be too worried about. Learn how your comment data is processed. }, 3. Shut off the pump and tighten the gauge more to open up the crack slightly. "height": "219", necessary). }, To disconnect a side mount valve from the filter, open the air bleeder and drain most of the water from the filter tank, then loosen the bulkhead union nuts. At the point where the Pump and Return pipes are threaded into the valve is a common spot for a leak. Use a sponge or leaf blower to remove the water sitting under the handle, and turn the pump back on and see if it still leaks. wrench 1/2 to 3/4 of a turn to secure multi-port valve to filter body (Detail 2). Is this really the correct replacement for a 1-1/2" multi-port 7 function sand filter valve? 1. until hand tight. Reply, Keith, The WVS003 has a total of 3 ports. It may be damaged or out of the groove. onto already installed buttress (#10). See attached pics.
1008 clamp style multi- port valve that is bad I think we got it in 2009 its a sand filter can yo please tell me which one would replace that valve. Hi thats a brand/model we are not familiar with here in the US- but I did a quick google search for V700 multiport valves and found several listings for .au websites, so yes seems to be still available. It has water coming out of the backwash when it is on filter. All orders received before noon will ship that SAME DAY. Install waste adapter fitting (#1) with o-ring (#2) (Detail 4). }, Hello and thank you. filter tank opening, add only recommended #20 grade silica sand (see Fill Chart). Inspect and lubricate the o-rings on the valve sweep elbows. If that didnt work, then you may have to consider a valve rebuild. If you have unions, or install unions instead of couplings, you can quickly disconnect the Pump and Return pipes (for valve repairs, sand changes, or other repairs). need replacement top. Thanks, Hi,Guthrie. My number is 808 0043 wat 1208.
Move it slightly left and right and then back to the Filter position. (6/20/2011), product was exactly what we needed. It's a good valve, and had the folks who installed my pool not over tightened the original one cracking the top, I would still be using the original. Please email us at sales@waterwayparts.com and we can send you the file.
Reply, Hi, Judee. If it begins to saturate the ground under the equipment you may want to take action. Click this link here to order - WVS003 Replacement Valve
Robert
Valve is now in Thanks. The air slowly leaks into the filter, and the water runs out thru the pump, and back to the pool. Is the filter pressure higher this year than before? "caption": "In The Swim Blog" hand tighten (Detail 4a). (5/18/2011). Replace the key into the valve and tighten up the cover screws, then fire-up the pump to check for leaks. Above ground pools are easy to maintain if you have the hardware to go with them. The water is then collected by the under drain and pumped back into the pool. The first thing to check is that the system is not under unusually high pressure, from a dirty filter, closed return valves or plugged wall returns. Thread into multi-port
"dateModified": "1/22/2020", The waste port pictured in the image you are looking at it on the opposite side of the other 2 ports. tank full with water prior to adding sand. (LogOut/ Waterway, Alternate Part #'sWVS003, 26-270-1520, WWWVS003, Fits currentWaterway Carefree SandFilters, How long do you think it will be out of stock
Reply, I have a waterway 808 0043.
A: Another common leak is a small trickle of water running down below the pressure gauge on top mount sand filters.
(4/16/2016). Reply, on valve positioner not snapping down so water is coming out of backwash port. Rotate multi-port valve handle to Rinse position. Turn off pump. "datePublished": "1/22/2020", We bought a house with the pool and pump no directions came with it. This valve WVS003 is the correct replacement. Reply, due you have part # 808-0043n ? Any help
13. The much cheaper way is to remove the key assembly from the valve, and knock out the pin to remove the handle. You want to make sure the gauge is firmly held in place, if the gauge were to shoot out under pressure, you could lose a lot of water before discovering the leak.
Position and hand tighten smaller end of sand filter hose assembly (#15) to top Shipping Details & Conditions. I get very frustrated w this thing the gasket is 17 bucks each?? can I lube positioner somehow to work smoothly? Reply, This part appears to be out of stock everywhere. This valve will work with model manufacturer after 2001. Remove the key assembly and look under the lid at the spring to check for rust that has broken the springs coil. Ft. "primaryImageOfPage": { valve. Multiports also offer Waste and Recirculate functions, which can be useful at times. The pool was bought around 2010. A: There is always some rain water that collects around the handle, but if water starts to ooze up and overflow onto the lid, you have a common multiport valve leak. the handle on diverter broke. No matter what position it's in, water comes out of the backwash drain. If you find that the spider gasket looks good but is just loose, break out the Super Glue or silicone, and use dabs to glue any loose rubber down into the (dry) grooves of the valve body. thank you
Reply, I'm trying to find a multiport valve for my proline filter the number on mine is 808-0043N.
This reverses the normal water flow in the system, stirring the sand up and blowing the dirty water out the backwash port. Most pool supplies ship via Fed Ex and delivery times within the Continental U.S range from 2-5 days.
First determine if the leak is coming from between the tank and the flange, or the valve and the flange. This product was just like the one that was on my filter to begin with. 2
Chemical corrosion can break down the stainless steel spring over time. Need a landed estimate time of arrival. For leaks on sidemount multiport valves, determine if the leak is between the tank and the bulkhead or the bulkhead and the filter. 8. Reply, my handle for the valve 808-0043-n broke/will handle for valve wvsoo3 work? Rotate multi-port valve handle to Filter position. Cold water temperatures will make it worse, as the o-ring can shrink just slightly, or small bits of grit and debris can get wedged up around the stem o-rings, causing leaks. Over the last couple of seasons the handle of the valve sounds as if a plastic gear is stripping and skipping. Bulkheads also have gaskets and spacers on both sides of the tank wall, that may need service or replacement at some point which may be after youve tightened the bulkhead, but it still continues to ooze water. Change), You are commenting using your Facebook account. Reply, I have a proline high rate sand filter model # FS022, and the valve assembly is leaking out the backwash port.. bought it in 2007 and manual shows multiport valve assembly part # wvs003nwill this fix problem and is your wvs003 the right part? Reply, My mutliport valve is cracked in several places on the top port. For this situation, I would first just reposition the valve. i have two ports that cracked and need to replace the assembly. Reply, Hi Erich, We actually do now have this valve in stock, so I would suggest ordering it now through the website as our inventory has been selling fast. "@type": "BlogPosting", DE multiports and Sand multiports are not interchangeable, because they operate in reverse. Be sure that during reassembly, you orient the cover and rotor to each other in the same direction as before. If it still leaks after repositioning the rotor onto the spider gasket, shut off the pump again and remove all of the cover screws, and pull out the key assembly. Ive plugged the waste line before, in a pinch but it should be avoided; these problems above can cause water to bypass the filter, resulting in poor filtration, and one time in the future someone is going to forget to open the backwash line before backwashing, which can cause even bigger problems. Repeat steps 3 & 4 until all discharge water is clear while pump is turned on. nanniesrock
Do you know if you will be getting more? The part that mates with the stand pipe? Reply, The WVS002 is the valve prior to 2001 and the WVS003 is the valve after 2001. "image": { 90 second intervals or until discharge water is clear. Pressure was around 14# at install runs at 20 now. If the flange is leaking where it connects to the tank, Im afraid I dont have much help for you. Reply, After back washing the pool and returning to filter position , water pours out of the backwash hose opening on the filter. "contentUrl": "https://x1.adis.ws/v1/media/graphics/i/lesl/its-logo-wide", 7. (LogOut/ When this happens, your valve handle is floppy and theres no tension when you push down. Reply, I need to replace the valve on my 19" Proline sand filter and the only number that I could find is 718-1960. Fill in your details below or click an icon to log in: You are commenting using your WordPress.com account. "@type": "ImageObject", Reply, I have a Proline 808-0042-N.1008 7 Position multiport Valve (sand Filter) with a 22 inch. "keywords": "", If you see a water leak around the filter when the filter is running, that is likely an air leak when the filter is off. Another cause of a backwash line leaking is that the spring inside of the key assembly has failed. What should i do? Problems with valve, like broken spring under lid, or gasket installed upside down (flat side goes down), or gasket not glued in place. To do this you may need to cut the pipes with a hacksaw, and glue couplings to reconnect the pipes afterwards. Still no good. The Eco Kleer is preferred by many swimming pool owners because they come in varying sizes with different filtration methods. I have a Pentair SD40 I recently replaced the sand. Push multi-port valve evenly onto You can replace the PVC fittings and some pipe, which you can find at any home or hardware store, along with pvc primer and glue. Reply, Lubingparts will not likely resolve the issue. I have heard of filter valves leaking when some poorly graded filter sand was used. These two o-rings, about the size of a quarter, fit onto the stem (which is connected to the rotor, aka footpad or diffuser or diverter), or they fit under the cover. I am including pics bc I dont know what model # it is. Hand tighten, then turn with large pliers for another full revolution, being careful not to overtighten. If youre guilty of this, peel off the previous years layers and lay on 1-2 new layers of Teflon tape (always wrapping the threads in a clockwise direction).
Remove 4 hose clamps (#14) and position over end of corrugated hoses (#13). You can view that as key number 9 on the parts diagram when you click here. Turn pump on and run for "headline": "Leaky Pool Filter Multiport Valves",
If you definitely determine that the threads are stripped inside of the valve, you can thread in a Heli-Coil or other 1/4in-20 thread repair insert, which involves tapping out the hole slightly larger, and screwing in a double threaded helix type of bushing, which gives you new 1/4in threads for the gauge. using bolt (#20) and washer (#21) as shown. Or the filter sand maybe? The valve threads cant be tapped or rethreaded, because then the gauge threads will be too small. If it still leaks, or weeps, check to see if return side pressure can be reduced, by changing filter sand, and/or reducing resistance after the filter with less equipment, straighter runs or larger diameter pipe. We have the complete line of all ECO-Kleer pump and filter parts in stock. Install multi-port valve with inlet and outlet ports facing pool. Seems like the quick and thorough fix would be to replace the entire waterway. Valve plumbed backwards on the in/out ports 2.
This is commonlydue to the springfailing in the valve. 2. 5. My Poolrite V700 multiport valve seems to be leaking above the flange, where the valve body is moulded onto the black flange that is screwed onto the filter. Run the filter on rinse for 1minute. Your options are to replace the MPV Handle - 602-1931, Valve Lid Assembly - 600-9600or theNew Style Valve -WVS003. A third cause of the pressure gauge leaking problem is when the valve body is cracked just below where the gauge screws in. { Install corrugated hose (#13) onto return sweep assembly (#12), on multi-port
Hi David, did you just replace the pump? If there is no damage to the gasket or to the spring under the lid of the valve, then you would suspect an obstruction or restriction (dirty filter, bad sand, plugged returns, closed valves, clogged line, backwards plumbed MPV), or as you mention, an overpowered pump. Reply, 1
Orders that are under $40 will have a $5.99 shipping fee added. Not uncommon, and not really a problem. Reply, Does it come with the threaded ring
Clean it out with a toothbrush or small wire brush, and be sure its dry. Reply, Is there anyway you can just purchase they handle on the valve, the plastic handle for direction of the valve broke .valve is okay . Reply, Sand keeps flowing in after I rinxe and then go to filter---am I missing something? it has part # 808-0043-n
If you are not sure what filter model that you have then please emailus images of the filter and valve to upload@inyopools.comso we can confirm for you.